/*

ARIA header files for use with ARNL 1.7.1

Copyright(C) 2004, 2005 ActivMedia Robotics, LLC. 
Copyright(C) 2006, 2007, 2008, 2009 MobileRobots Inc.
All rights reserved.

This copy of Aria was relicensed for use with Arnl and the Arnl
license by MobileRobots Inc.  If you wish to download a seperate
distribution of Aria licensed under the GPL or a commercial license go to
http://www.mobilerobots.com/SOFTWARE/aria.html or contact MobileRobots
Inc, at robots@mobilerobots.com or MobileRobots Inc,
10 Columbia Drive, Amherst, NH 03031; 800-639-9481

MobileRobots Inc hereby grants to other individuals or
organizations permission to use this software with Arnl and in
compliance with the Arnl license.  This software may not be
distributed to others except by MobileRobots Inc.

MobileRobots Inc does not make any representations about the
suitability of this software for any purpose.  It is provided "as is"
without express or implied warranty.

*/
#ifndef ARCAMERACOMMANDS_H
#define ARCAMERACOMMANDS_H

#include "ariaUtil.h"

/// Commands that are supported by the camera (ArPTZ) and video classes.
/**
 * ArCameraCommands defines the commands that are commonly supported by 
 * the Aria camera and video classes.  The commands that are actually 
 * supported for a particular camera are specified in the ArCameraCollection.
 * <p>
 * There are basically two classes of commands:
 * <ol>
 *   <li>Double Format Commands:  These commands use the new double interface 
 *   to the Aria camera classes.  They are generally preferred for future
 *   development since they provide finer control over the camera movements. 
 *   In addition, only these commands will work correctly in a multi-camera 
 *   configuration.</li>
 * 
 *   <li>Integer Format Commands:  These commands are maintained for backwards 
 *   compatibility.  They will not work correctly in a multi-camera 
 *   configuration.  (Only the first camera will be used.)</li>
 * </ol>
 *
**/
class ArCameraCommands
{
public:

  // ---------------------------------------------------------------------------
  // Double Format Commands
  // ---------------------------------------------------------------------------

  /// Returns the current pan/tilt/zoom of the camera (in double format).
	AREXPORT static const char *GET_CAMERA_DATA;

  /// Returns general information about the camera (in double format).
  /**
   * General information about the camera includes the pan/tilt/zoom ranges
   * and whether zooming is available.  In general, clients need only 
   * to request this data once at startup.
  **/
  AREXPORT static const char *GET_CAMERA_INFO;

  /// Returns the last image obtained from the camera.
  AREXPORT static const char *GET_PICTURE;
  
  /// Returns the last image obtained from the camera.
  AREXPORT static const char *GET_PICTURE_OPTIM;

  /// Returns a high resolution image from the camera, suitable for saving.
  /**
   * This command is not yet fully supported.
  **/
	AREXPORT static const char *GET_SNAPSHOT;

  /// Returns whether the camera/image should be displayed by the client.
  /**
   * This command is not yet fully supported.
  **/
	AREXPORT static const char *GET_DISPLAY;
	

  /// Sends a command to the camera to set its pan/tilt/zoom, in absolute terms (in double format).
	AREXPORT static const char *SET_CAMERA_ABS;

  /// Sends a command to the camera to set its pan/tilt, as specified by a percent offset of its current frame.
	AREXPORT static const char *SET_CAMERA_PCT;

  /// Sends a command to the camera to set its pan/tilt/zoom, relative to its current position (in double format).
	AREXPORT static const char *SET_CAMERA_REL;

  /// Sends a packet back with the list of modes
  AREXPORT static const char *GET_CAMERA_MODE_LIST;

  /// A packet that gets sent out when the mode is changed
  /**
     Note that each mode might have arguments after it for just that
     mode, so only the mode name at the start is generic.
   **/
  AREXPORT static const char *CAMERA_MODE_UPDATED;

  /// A command that sets the mode of the camera
  /**
     Note that each mode can have its own arguments so only the mode
     name at the start is generic.
   **/
  AREXPORT static const char *SET_CAMERA_MODE;

  /// A command that resets the camera 
  AREXPORT static const char *RESET_CAMERA;

  // ---------------------------------------------------------------------------
  // Integer Format Commands
  //    The following commands are maintained solely for backwards-compatibility. 
  // ---------------------------------------------------------------------------


  /// Returns the current pan/tilt/zoom of the camera (as byte2 integers).
  /**
   * @deprecated GET_CAMERA_DATA is preferred instead
  **/
 	AREXPORT static const char *GET_CAMERA_DATA_INT;

  /// Returns general information about the camera (as byte2 integers).
  /**
   * @deprecated GET_CAMERA_INFO is preferred instead
  **/
  AREXPORT static const char *GET_CAMERA_INFO_INT;

  /// Sends a command to the camera to set its pan/tilt/zoom, in absolute terms (as byte integers).
  /**
   * @deprecated SET_CAMERA_ABS is preferred instead
  **/
	AREXPORT static const char *SET_CAMERA_ABS_INT;

  /// Sends a command to the camera to set its pan/tilt/zoom, relative to its current position (as byte integers).
  /**
   * @deprecated SET_CAMERA_REL is preferred instead
  **/
	AREXPORT static const char *SET_CAMERA_REL_INT;

  /// Sends a command to the camera to set its pan/tilt, as specified by a percent offset (as byte integers).
  /**
   * @deprecated SET_CAMERA_PCT is preferred instead
  **/
	AREXPORT static const char *SET_CAMERA_PCT_INT;
 
  /**
   * @deprecated GET_PICTURE is preferred instead
  **/
  AREXPORT static const char *GET_VIDEO;
  
  /**
   * @deprecated GET_SNAPSHOT is preferred instead
  **/
  AREXPORT static const char *GET_SNAPSHOT_PLAIN;

}; // end class ArCameraCommands

#endif // ARCAMERACOMMANDS_H