/* ARIA header files for use with ARNL 1.7.1 Copyright(C) 2004, 2005 ActivMedia Robotics, LLC. Copyright(C) 2006, 2007, 2008, 2009 MobileRobots Inc. All rights reserved. This copy of Aria was relicensed for use with Arnl and the Arnl license by MobileRobots Inc. If you wish to download a seperate distribution of Aria licensed under the GPL or a commercial license go to http://www.mobilerobots.com/SOFTWARE/aria.html or contact MobileRobots Inc, at robots@mobilerobots.com or MobileRobots Inc, 10 Columbia Drive, Amherst, NH 03031; 800-639-9481 MobileRobots Inc hereby grants to other individuals or organizations permission to use this software with Arnl and in compliance with the Arnl license. This software may not be distributed to others except by MobileRobots Inc. MobileRobots Inc does not make any representations about the suitability of this software for any purpose. It is provided "as is" without express or implied warranty. */ #ifndef ARSICK_H #define ARSICK_H #include "ariaTypedefs.h" #include "ArRobotPacket.h" #include "ArLaser.h" #include "ArFunctor.h" #include "ArCondition.h" #include "ArLMS2xx.h" class ArSick : public ArLMS2xx { public: /// Constructor AREXPORT ArSick(size_t currentBufferSize = 361, size_t cumulativeBufferSize = 0, const char *name = "laser", bool addAriaExitCB = true, bool isSecondLaser = false); /// Destructor AREXPORT virtual ~ArSick(); enum BaudRate { BAUD9600, ///< 9600 Baud BAUD19200, ///< 19200 Baud BAUD38400, ///< 38400 Baud BAUD_INVALID ///< Invalid baud }; enum Degrees { DEGREES180, ///< 180 Degrees DEGREES100, ///< 100 Degrees DEGREES_INVALID ///< Invalid degrees }; enum Increment { INCREMENT_ONE, ///< One degree increments INCREMENT_HALF, ///< Half a degree increments INCREMENT_INVALID ///< Increment invalid }; enum Units { UNITS_1MM, ///< Uses 1 mm resolution (8/16/32 meter max range) UNITS_1CM, ///< Uses 1 cm resolution (80/160/320 meter max range) UNITS_10CM, ///< Uses 10 cm resolution (150 meter max range) UNITS_INVALID ///< Invalid units }; enum Bits { BITS_1REFLECTOR, ///< Uses 1 reflector bits (means 32/320/150 meter range) BITS_2REFLECTOR, ///< Uses 2 reflector bits (means 16/160/150 meter range) BITS_3REFLECTOR, ///< Uses 3 reflector bits (means 8/80/150 meter range) BITS_INVALID ///< Invalid bits }; /// Sees if this is trying to connect to the laser at the moment (note no other range devices work like this so you probably shouldn't use this) bool tryingToConnect(void) { return isTryingToConnect(); } /// Runs the laser off of the robot bool runOnRobot(void) { return internalRunOnRobot(); } /// Use this to manually configure the laser before connecting to it AREXPORT void configure(bool useSim = false, bool powerControl = true, bool laserFlipped = false, BaudRate baud = BAUD38400, Degrees deg = DEGREES180, Increment incr = INCREMENT_ONE); /// Shorter configure for the laser (settings are overridden by the .p file) AREXPORT void configureShort(bool useSim = false, BaudRate baud = BAUD38400, Degrees deg = DEGREES180, Increment incr = INCREMENT_ONE); /// Sets the ranging/reflector information AREXPORT void setRangeInformation(Bits bits = BITS_1REFLECTOR, Units units = UNITS_1MM); // Gets whether the laser is simulated or not AREXPORT bool isUsingSim(void); /// Gets whether the computer is controling laser power or not AREXPORT bool isControllingPower(void); /// Gets whether the laser is flipped over or not AREXPORT bool isLaserFlipped(void); /// Gets the degrees the laser is scanning AREXPORT Degrees getDegrees(void); #ifndef SWIG // this ends up causing problems in the Java wrapper, since it has the // wrong return type vs. ArLaser::getIncrement(). But we need to keep // this function for backwards compatability. /// Gets the amount each scan increments AREXPORT Increment getIncrement(void); #endif /// Gets the Bits the laser is using AREXPORT Bits getBits(void); /// Gets the Units the laser is using AREXPORT Units getUnits(void); // Sets whether the laser is simulated or not AREXPORT void setIsUsingSim(bool usingSim); /// Sets whether the computer is controling laser power or not AREXPORT void setIsControllingPower(bool controlPower); /// Sets whether the laser is flipped over or not AREXPORT void setIsLaserFlipped(bool laserFlipped); /** You should use setCumulativeCleanDist for this now @deprecated */ void setFilterCumulativeCleanDist(double dist) { setCumulativeCleanDist(dist); } /** You should use getCumulativeCleanDist for this now @deprecated */ double getFilterCumulativeCleanDist(void) { return getCumulativeCleanDist(); } /** You should use setCumulativeCleanInterval for this now @deprecated */ void setFilterCleanCumulativeInterval(int milliSeconds) { setCumulativeCleanInterval(milliSeconds); } /** You should use getPlanarCumulativeCleanInterval for this now @deprecated */ int getFilterCleanCumulativeInterval(void) { return getCumulativeCleanInterval(); } /** You should use setMinDistBetweenCumulative for this now @deprecated */ void setFilterCumulativeNearDist(double dist) { setMinDistBetweenCumulative(dist); } /** You should use getMinDistBetweenCumulative for this now @deprecated */ double getFilterCumulativeNearDist(void) { return getMinDistBetweenCumulative(); } /** You should use setMinDistBetweenCurrent for this now @deprecated */ void setFilterNearDist(double dist) { setMinDistBetweenCurrent(dist); } /** You should use getMinDistBetweenCurrent for this now @deprecated */ double getFilterNearDist(void) { return getMinDistBetweenCurrent(); } /** You should use setMaxInsertDistCumulative for this now @deprecated */ void setFilterCumulativeInsertMaxDist(double dist) { setMaxInsertDistCumulative(dist); } /** You should use getMaxInsertDistCumulative for this now @deprecated */ double getFilterCumulativeInsertMaxDist(void) { return getMaxInsertDistCumulative(); } /** Used to set the min range, this is no longer used because it doesn't actually solve anything (because beams that see near things and far things average) @deprecated **/ unsigned int getMinRange(void) { return 0; } /** Used to get the min range, this is no longer used because it doesn't actually solve anything (because beams that see near things and far things average) @deprecated **/ void setMinRange(unsigned int minRange) { } /** You should see setMaxDistToKeepCumulative (it replaces this) @deprecated */ void setFilterCumulativeMaxDist(double dist) { setMaxDistToKeepCumulative(dist); } /** You should see getMaxDistToKeepCumulative (it replaces this) @deprecated */ double getFilterCumulativeMaxDist(void) { return getMaxDistToKeepCumulative(); } /** you should use setMaxSecondsToKeepCumulative instead, (replaces this) * @deprecated */ void setFilterCumulativeMaxAge(int seconds) { setMaxSecondsToKeepCumulative(seconds); } /** you should use getMaxSecondsToKeepCumulative instead, (replaces this) * @deprecated */ int getFilterCumulativeMaxAge(void) { return getMaxSecondsToKeepCumulative(); } /// Gets the number of laser packets received in the last second int getSickPacCount(void) { return getReadingCount(); } /// Adds a connect callback void addConnectCB(ArFunctor *functor, ArListPos::Pos position = ArListPos::LAST) { if (position == ArListPos::FIRST) ArLMS2xx::addConnectCB(functor, 75); else if (position == ArListPos::LAST) ArLMS2xx::addConnectCB(functor, 25); else ArLMS2xx::addConnectCB(functor, 25); } /// Adds a disconnect callback void remConnectCB(ArFunctor *functor) { ArLMS2xx::remConnectCB(functor); } /// Adds a callback for when a connection to the robot is failed void addFailedConnectCB(ArFunctor *functor, ArListPos::Pos position = ArListPos::LAST) { if (position == ArListPos::FIRST) ArLMS2xx::addFailedConnectCB(functor, 75); else if (position == ArListPos::LAST) ArLMS2xx::addFailedConnectCB(functor, 25); else ArLMS2xx::addFailedConnectCB(functor, 25); } /// Removes a callback for when a connection to the robot is failed void remFailedConnectCB(ArFunctor *functor) { ArLMS2xx::remFailedConnectCB(functor); } /// Adds a callback for when disconnect is called while connected void addDisconnectNormallyCB(ArFunctor *functor, ArListPos::Pos position = ArListPos::LAST) { if (position == ArListPos::FIRST) ArLMS2xx::addDisconnectNormallyCB(functor, 75); else if (position == ArListPos::LAST) ArLMS2xx::addDisconnectNormallyCB(functor, 25); else ArLMS2xx::addDisconnectNormallyCB(functor, 25); } /// Removes a callback for when disconnect is called while connected void remDisconnectNormallyCB(ArFunctor *functor) { ArLMS2xx::remDisconnectNormallyCB(functor); } /// Adds a callback for when disconnection happens because of an error void addDisconnectOnErrorCB(ArFunctor *functor, ArListPos::Pos position = ArListPos::LAST) { if (position == ArListPos::FIRST) ArLMS2xx::addDisconnectOnErrorCB(functor, 75); else if (position == ArListPos::LAST) ArLMS2xx::addDisconnectOnErrorCB(functor, 25); else ArLMS2xx::addDisconnectOnErrorCB(functor, 25); } /// Removes a callback for when disconnection happens because of an error void remDisconnectOnErrorCB(ArFunctor *functor) { ArLMS2xx::remDisconnectOnErrorCB(functor); } /// Adds a callback that is called whenever a laser packet is processed void addDataCB(ArFunctor *functor, ArListPos::Pos position = ArListPos::LAST) { if (position == ArListPos::FIRST) ArLMS2xx::addReadingCB(functor, 75); else if (position == ArListPos::LAST) ArLMS2xx::addReadingCB(functor, 25); else ArLMS2xx::addReadingCB(functor, 25); } /// Removes a callback that is called whenever a laser packet is processed void remDataCB(ArFunctor *functor) { ArLMS2xx::remReadingCB(functor); } /// Sets the time without a response until connection assumed lost void setConnectionTimeoutTime(int secs) { setConnectionTimeoutSeconds(secs); } /// Gets the time without a response until connection assumed lost int getConnectionTimeoutTime(void) { return ArMath::roundInt(getConnectionTimeoutSeconds()); } }; #endif //ARSICK_H