Linux version 2.4.26-ts10 (joff@construct) (gcc version 3.3.4) #6 Thu Mar 30 11:50:07 MST 2006
CPU: Arm920Tid(wb) revision 0
Machine: ep9301
On node 0 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 1 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 4 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 5 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 16 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 17 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 18 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
On node 19 totalpages: 2048
zone(0): 2048 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/ram0 init=/linuxrc console=ttyAM0,115200
Relocating machine vectors to 0xffff0000
Console: colour dummy device 80x30
Calibrating delay loop... 99.94 BogoMIPS
Memory: 8MB 8MB 8MB 8MB 8MB 8MB 8MB 8MB = 64MB total
Memory: 57028KB available (1112K code, 328K data, 72K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
CPU: Testing write buffer: pass
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
ttyAM0 at MMIO 0x808c0000 (irq = 52) is a AMBA
ttyAM1 at MMIO 0x808d0000 (irq = 54) is a AMBA
ttyAM2 at MMIO 0x808e0000 (irq = 55) is a AMBA
pty: 1024 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ enabled
Real Time Clock Driver v1.10f
ep93xx_eth() version: ep93xx_eth.c: V1.0 09/04/2003 Cirrus Logic
RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
about to do sbc_setinfo
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.97 (double precision)
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 4096K
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Freeing init memory: 72K
Console: switching to colour frame buffer device 80x30
fb0: TS-7300 frame buffer device
ttyTS0 at MMIO 0x72000000 (irq = 40) is a TSUART
ttyTS1 at MMIO 0x72000004 (irq = 40) is a TSUART
ttyTS2 at MMIO 0x72000008 (irq = 40) is a TSUART
ttyTS3 at MMIO 0x7200000c (irq = 40) is a TSUART
ttyTS4 at MMIO 0x72000010 (irq = 40) is a TSUART
ttyTS5 at MMIO 0x72000014 (irq = 40) is a TSUART
ttyTS6 at MMIO 0x72000018 (irq = 40) is a TSUART
ttyTS7 at MMIO 0x7200001c (irq = 40) is a TSUART
ttyT9S0 at MMIO 0x72000000 (irq = 40) is a TSUART
ttyT9S1 at MMIO 0x72000004 (irq = 40) is a TSUART
ttyT9S2 at MMIO 0x72000008 (irq = 40) is a TSUART
ttyT9S3 at MMIO 0x7200000c (irq = 40) is a TSUART
ttyT9S4 at MMIO 0x72000010 (irq = 40) is a TSUART
ttyT9S5 at MMIO 0x72000014 (irq = 40) is a TSUART
ttyT9S6 at MMIO 0x72000018 (irq = 40) is a TSUART
ttyT9S7 at MMIO 0x7200001c (irq = 40) is a TSUART
sdcard0: Technologic Systems SD card controller, address 0x13000000
sdcard0: card size 990976 sectors, serial number 0x802004d1
Partition check:
 sdcard0a: p1 p2 p3
sdcard1: Technologic Systems SD card controller, address 0x72000020
sdcard1: card size 501760 sectors, serial number 0x10228809
 sdcard1a: p1 p2 p3
eth1: Open Ethernet Core Version 1.0
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xe0020000, IRQ 56
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
hub.c: new USB device not_pci-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x4d9/0x22) is not claimed by any active driver.
hub.c: new USB device not_pci-3, assigned address 3
usb.c: USB device 3 (vend/prod 0x62a/0x3) is not claimed by any active driver.
usb.c: registered new driver hid
input: USB HID v1.10 Keyboard [Chicony  USB Keyboard] on usb1:2.0
input: USB HID v1.10 Device [Chicony  USB Keyboard] on usb1:2.1
input: USB HID v1.10 Mouse [MosArt Optical Mouse] on usb1:3.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
